1. Mechanical properties and behaviour
1.1. Testing (Engineers stuffs)
1.1.1. Extrensic properties (strength properties)
1.1.1.1. Tensile test (ASTM E8, ASTM A370, ISO 6892)
1.1.1.1.1. Stress
1.1.1.1.2. Strain
1.1.1.1.3. Yield deformation
1.1.1.2. Torsion test (ASTM A938, ISO 7800)
1.1.1.2.1. Modulus of elasticity
1.1.1.2.2. Shear yield strenght
1.1.1.2.3. Shear strength
1.1.1.2.4. Shear modulus of rupture
1.1.1.2.5. Ductility
1.1.1.3. Fatigue test
1.1.1.4. Fracture mechanics test (BS 7448, NS-EN 10225, ASTM E1820)
1.1.1.5. Compressive test
1.1.1.6. Creep test
1.1.2. Intrinsic properties
1.1.2.1. Impact test
1.1.2.1.1. IZOD Impact Strenght Test
1.1.2.1.2. Charpy Impact Test
1.1.2.2. Hardness test
1.1.2.2.1. Brinell Hardness Test
1.1.2.2.2. Vickers Hardness Test
1.1.2.3. Corrosion resistance
1.1.2.3.1. Salt Spray Testing
1.1.2.3.2. CASS Exposure Testing
1.1.2.3.3. Immersion Corrosion Testing
1.1.2.4. Non-destructive test
1.1.2.4.1. Acoustic Emission Testing
1.1.2.4.2. Electromagnetic Testing
1.1.2.4.3. Leak Testing
1.2. Characterization for the explanation on the intrinsic and extrinsic properties (Scientist stuffs)
1.2.1. microstructure, nanostructure, and crystal structure
1.2.1.1. grain size and grain boundaries (ASTM E112, ASTM E930, ASTM E1181, ASTM E1382, ASTM E2627, ISO 643, ISO 2624, ISO 4499-2, ISO 14250)
1.2.1.1.1. Light microscope
1.2.1.1.2. Electron Back Scatter Diffraction (EBSD) in SEM
1.2.1.2. Crystal structure - lattice parameters
1.2.1.2.1. TEM
1.2.1.2.2. Diffraction
1.2.1.3. Orientation effects - texture (ASTM E82/E82M)
1.2.1.3.1. back-reflection Laue procedure using X-ray source)
1.2.1.4. Material phases - volume fraction of phase constituents (ASTM E562, ASTM E975, ASTM E1245, ASTM E12688, ISO 9042)
1.2.1.4.1. Light microscope and SEM (point count method)
1.2.1.4.2. XRD
1.2.1.5. Material phases - precipitates and inclusion (ASTM E45, ASTM E1245, ASTM E2142, ASTM E2283, ISO 4967)
1.2.1.5.1. Light microscope
1.2.1.5.2. SEM
1.2.1.6. Voids, microcraks and delaminations (ASTM E3, ASTM E165, ASTM E1209, ASTM E 1210, ASTM E1219, ASTM E1220, ASTM E1418, ASTM E2297, ISO 4505, ISO 4494-4)
1.2.1.6.1. distructive
1.2.1.6.2. non-distructive