1. IoPower-meter SP-1ac & SP-2dc
1.1. More
1.1.1. Disconnect
1.1.2. Status
1.1.2.1. Find (PUSH ON)
1.1.2.2. REMOVE (NO GROUP)
1.1.2.3. Device / Model No.
1.1.2.4. RSSI
1.1.2.5. MAC address
1.1.2.6. Power: Bat. / Ext
1.1.2.7. Place/ Zone/ Location/ Point 1
1.1.2.8. Picture_Point 1 (Photo)
1.1.2.9. Place/ Zone/ Location/ Point 2
1.1.2.10. Picture_Point 2 (Photo)
1.1.3. Set-up
1.1.3.1. 1~ Power parameter Hide/ Visible
1.1.3.2. DCV
1.1.3.3. ACV
1.1.3.4. ACA
1.1.3.5. kW
1.1.3.6. PF
1.1.3.7. Hz
1.1.3.8. V_THD%
1.1.3.9. I_THD%
1.1.3.10. TDD%__#___A Rated
1.1.3.11. Pfun kW
1.1.3.12. VA
1.1.3.13. VAR
1.1.3.14. +Ip
1.1.3.15. -Ip
1.1.3.16. +Vp
1.1.3.17. -Vp
1.1.3.18. CF
1.1.3.19. kWHr
1.1.4. Data Logger (NO GROUP)
1.1.4.1. Interval Timer
1.1.4.2. SD card information
1.1.4.3. SD card: OVERWRITE/ CLOSE
1.1.4.4. Interval
1.1.4.5. Logging: START/ STOP
1.1.4.6. SD card EDIT
1.1.4.7. SD card DOWN LOAD
1.1.4.8. File UP LOAD
1.1.5. 3~Power meter
1.1.5.1. 已經設定好
1.1.5.1.1. More
1.1.5.1.2. ReadingS
1.1.5.2. 還沒設定好
1.1.5.2.1. 3P3W3M DELTA
1.1.5.2.2. 3P3W3M WYE
1.1.5.2.3. 3P4W3M WYE
1.1.5.2.4. 3P4W3M DELTA center tapped
1.1.5.2.5. 3P4W3M OPEN DELTA center tapped
1.1.5.2.6. 1P3W2M Line to Line with Neutral
1.1.6. VFD Load
1.1.6.1. 3~ VFD
1.1.6.1.1. 已經設定好
1.1.6.1.2. 還沒設定好
1.1.6.2. 1~ VFD
1.1.6.2.1. More
1.1.6.2.2. ReadingS
1.1.7. FFT
1.1.7.1. More
1.1.7.1.1. Disconnect
1.1.7.1.2. Deviation
1.1.7.1.3. Unit (%fnd / V / A)
1.1.7.1.4. Order (ODD / EVEN / inter Harmonic 0.5~17 / inter Harmonic 17.5~35)
1.1.7.1.5. Data Logger (NO GROUP)
1.1.7.2. Bar Graph
1.1.7.3. Table
1.2. ReadingS
1.2.1. Hide (在 Set-up 裡面可以改成 Visible)
1.2.2. Real Time Logger
1.2.2.1. More
1.2.2.1.1. Disconnect
1.2.2.1.2. Interval
1.2.2.1.3. Duration
1.2.2.1.4. Add Parameter(PULL DOWN)
1.2.2.1.5. Max, Min, Avg (Hide/ Visible)
1.2.2.1.6. Scale ( Log, Linear )
1.2.2.1.7. Hi/Lo limit Curve ( Hide/ Visible )
1.2.2.1.8. Save
1.2.2.1.9. Import
1.2.2.1.10. Export
1.2.2.2. Zoom in
1.2.2.3. Zoom out
1.2.2.4. Full Screen
1.2.2.5. Lessen
1.2.2.6. Trend Curve
2. IoLeakage-meter SL-01 & ML-01
2.1. More
2.1.1. Disconnect
2.1.2. Status
2.1.2.1. Find (PUSH ON)
2.1.2.2. REMOVE (NO GROUP)
2.1.2.3. Device / Model No.
2.1.2.4. RSSI
2.1.2.5. MAC address
2.1.2.6. Power: Bat. / Ext
2.1.2.7. Place/ Zone/ Location/ Point 1
2.1.2.8. Picture_Point 1 (Photo)
2.1.3. Function Select (NO GROUP)
2.1.3.1. LPF ON/OFF
2.1.3.2. Auto Range
2.1.3.3. 60.00mA
2.1.3.4. 600.0mA
2.1.3.5. 6.000A
2.1.3.6. 60.00A
2.1.3.7. 200.0A
2.1.3.8. Hz
2.1.3.9. Inrush
2.1.4. Data Logger (NO GROUP)
2.1.4.1. Interval Timer
2.1.4.2. SD card information
2.1.4.3. SD card: OVERWRITE/ CLOSE
2.1.4.4. Interval
2.1.4.5. Logging: START/ STOP
2.1.4.6. SD card EDIT
2.1.4.7. SD card DOWN LOAD
2.1.4.8. File UP LOAD
2.2. ReadingS
2.2.1. Real Time Logger
2.2.1.1. More
2.2.1.1.1. Disconnect
2.2.1.1.2. Interval
2.2.1.1.3. Duration
2.2.1.1.4. Add Parameter(PULL DOWN)
2.2.1.1.5. Max, Min, Avg (Hide/ Visible)
2.2.1.1.6. Scale ( Log, Linear )
2.2.1.1.7. Hi/Lo limit Curve ( Hide/ Visible )
2.2.1.1.8. Save
2.2.1.1.9. Import
2.2.1.1.10. Export
2.2.1.2. Zoom in
2.2.1.3. Zoom out
2.2.1.4. Full Screen
2.2.1.5. Lessen
2.2.1.6. Trend Curve
3. Clamp-Meter_BT BM 208xBT
3.1. More
3.1.1. Disconnect
3.1.2. Status
3.1.2.1. Find (PUSH ON)
3.1.2.2. REMOVE (PRIVATE ONLY)
3.1.2.3. Device / Model No.
3.1.2.4. RSSI
3.1.2.5. MAC address
3.1.2.6. Power: Bat. / Ext
3.1.2.7. Place/ Zone/ Location/ Point 1 #
3.1.2.8. Picture_Point 1 (Photo)
3.1.3. Single-Step Record
3.1.3.1. Step No.
3.1.3.2. Date/ Time
3.1.3.3. Reading_1
3.1.3.4. Reading_n
3.1.3.5. Unit
3.2. ReadingS
3.2.1. Real Time Logger
3.2.1.1. More
3.2.1.1.1. Disconnect
3.2.1.1.2. Interval
3.2.1.1.3. Duration
3.2.1.1.4. Add Parameter(PULL DOWN)
3.2.1.1.5. Max, Min, Avg (Hide/ Visible)
3.2.1.1.6. Scale ( Log, Linear )
3.2.1.1.7. Hi/Lo limit Curve ( Hide/ Visible )
3.2.1.1.8. Save
3.2.1.1.9. Import
3.2.1.1.10. Export
3.2.1.2. Zoom in
3.2.1.3. Zoom out
3.2.1.4. Full Screen
3.2.1.5. Lessen
3.2.1.6. Trend Curve
4. IoSensor / IoPalm-meter ST-1t, ST-2t, ST-4TC, SS-2t-RTD, SH-1, MT-2t, MT-2t-RTD & MH-1
4.1. More
4.1.1. Disconnect
4.1.2. Status
4.1.2.1. Find (PUSH ON)
4.1.2.2. REMOVE (NO GROUP)
4.1.2.3. Device / Model No.
4.1.2.4. RSSI
4.1.2.5. MAC address
4.1.2.6. Power: Bat. / Ext
4.1.2.7. Place/ Zone/ Location/ Point 1
4.1.2.8. Picture_Point 1
4.1.2.9. Place/ Zone/ Location/ Point 2
4.1.2.10. Picture_Point 2
4.1.2.11. Place/ Zone/ Location/ Point 3
4.1.2.12. Picture_Point 3
4.1.2.13. Place/ Zone/ Location/ Point 4
4.1.2.14. Picture_Point 4
4.1.3. Set-up (NO GROUP)
4.1.3.1. ST-1t
4.1.3.1.1. Unit
4.1.3.1.2. T1 Hide/Visible
4.1.3.1.3. T1 OFFSET
4.1.3.2. ST-2t
4.1.3.2.1. Unit
4.1.3.2.2. T1 Hide/Visible
4.1.3.2.3. T1 OFFSET
4.1.3.2.4. T2 Hide/Visible
4.1.3.2.5. T2 OFFSET
4.1.3.3. ST-4TC
4.1.3.3.1. Data Output Rate
4.1.3.3.2. Unit
4.1.3.3.3. T1 Hide/ Visible
4.1.3.3.4. T1 OFFSET
4.1.3.3.5. T1 Thermocouple Type
4.1.3.3.6. T2 Hide/ Visible
4.1.3.3.7. T2 OFFSET
4.1.3.3.8. T2 Thermocouple Type
4.1.3.3.9. T3 Hide/ Visible
4.1.3.3.10. T3 OFFSET
4.1.3.3.11. T3 Thermocouple Type
4.1.3.3.12. T4 Hide/ Visible
4.1.3.3.13. T4 OFFSET
4.1.3.3.14. T4 Thermocouple Type
4.1.3.4. SS-2t-RTD
4.1.3.4.1. Unit
4.1.3.4.2. T1 Hide/ Visible
4.1.3.4.3. T1 OFFSET
4.1.3.4.4. T2 Hide/ Visible
4.1.3.4.5. T2 Sensor Type
4.1.3.4.6. T2 OFFSET
4.1.3.5. SH-1
4.1.3.5.1. Relative Humidity Hide/ Visible
4.1.3.5.2. Air Temp. Hide/ Visible
4.1.3.5.3. Mixing Ratio Hide/ Visible
4.1.3.5.4. Vapor Pressure Hide/ Visible
4.1.3.5.5. Dew Point Hide/ Visible
4.1.3.6. MT-2t & MT-2t-RTD
4.1.3.6.1. Unit
4.1.3.6.2. T1 Hide/ Visible
4.1.3.6.3. T1 OFFSET
4.1.3.6.4. T2 Hide/ Visible
4.1.3.6.5. T2 Sensor Type
4.1.3.6.6. T2 OFFSET
4.1.3.7. MH-1
4.1.3.7.1. Relative Humidity Hide/ Visible
4.1.3.7.2. Air Temp. Hide/ Visible
4.1.3.7.3. Mixing Ratio Hide/ Visible
4.1.3.7.4. Vapor Pressure Hide/ Visible
4.1.3.7.5. Dew Point Hide/ Visible
4.1.4. Data Logger (NO GROUP)
4.1.4.1. Interval Timer
4.1.4.2. SD card information
4.1.4.3. SD card: OVERWRITE/ CLOSE
4.1.4.4. Interval
4.1.4.5. Logging: START/ STOP
4.1.4.6. SD card EDIT
4.1.4.7. SD card DOWN LOAD
4.1.4.8. File UP LOAD
4.2. ReadingS
4.2.1. Hide (在 Set-up 裡面可以改成 Visible)
4.2.2. Real Time Logger
4.2.2.1. More
4.2.2.1.1. Disconnect
4.2.2.1.2. Interval
4.2.2.1.3. Duration
4.2.2.1.4. Add Parameter(PULL DOWN)
4.2.2.1.5. Max, Min, Avg (Hide/ Visible)
4.2.2.1.6. Scale ( Log, Linear )
4.2.2.1.7. Hi/Lo limit Curve ( Hide/ Visible )
4.2.2.1.8. Save
4.2.2.1.9. Import
4.2.2.1.10. Export
4.2.2.2. Zoom in
4.2.2.3. Zoom out
4.2.2.4. Full Screen
4.2.2.5. Lessen
4.2.2.6. Trend Curve
5. IoDMM BM-M03 & BM-M05
5.1. More
5.1.1. Disconnect
5.1.2. Status
5.1.2.1. Find (PUSH ON)
5.1.2.2. REMOVE (NO GROUP)
5.1.2.3. Device / Model No.
5.1.2.4. RSSI
5.1.2.5. MAC address
5.1.2.6. Power: Bat. / Ext
5.1.2.7. Place/ Zone/ Location/ Point 1
5.1.2.8. Picture_Point 1 (Photo)
5.1.3. Set-up
5.1.3.1. Multiple parameter Hide/ Visible
5.1.4. Function Select (NO GROUP)
5.1.4.1. AC, DC, AC+DC V, Hz
5.1.4.2. VFD_ ACV, Hz, V/F
5.1.4.3. AC, DC, AC+DC mV, Hz, %
5.1.4.4. OHM
5.1.4.5. Continuity
5.1.4.6. Capacitance
5.1.4.7. Diode
5.1.4.8. Temperature
5.1.4.9. AC, DC, AC+DC A, Hz
5.1.5. Data Logger (NO GROUP)
5.1.5.1. Interval Timer
5.1.5.2. SD card information
5.1.5.3. SD card: OVERWRITE/ CLOSE
5.1.5.4. Interval
5.1.5.5. Logging: START/ STOP
5.1.5.6. SD card EDIT
5.1.5.7. SD card DOWN LOAD
5.1.5.8. File UP LOAD
5.1.6. 3~ VFD VUR%(@VFD_ACV mode)
5.1.6.1. 已經設定好
5.1.6.1.1. VUR%
5.1.6.2. 還沒設定好
5.1.6.2.1. Va device select
5.1.6.2.2. Find Va device
5.1.6.2.3. Vb device select
5.1.6.2.4. Find Vb device
5.1.6.2.5. Vc device select
5.1.6.2.6. Find Vc device
5.2. ReadingS
5.2.1. Hide (在 Set-up 裡面可以改成 Visible)
5.2.2. Real Time Logger
5.2.2.1. More
5.2.2.1.1. Disconnect
5.2.2.1.2. Interval
5.2.2.1.3. Duration
5.2.2.1.4. Add Parameter(PULL DOWN)
5.2.2.1.5. Max, Min, Avg (Hide/ Visible)
5.2.2.1.6. Scale ( Log, Linear )
5.2.2.1.7. Hi/Lo limit Curve ( Hide/ Visible )
5.2.2.1.8. Save
5.2.2.1.9. Import
5.2.2.1.10. Export
5.2.2.2. Zoom in
5.2.2.3. Zoom out
5.2.2.4. Full Screen
5.2.2.5. Lessen
5.2.2.6. Trend Curve
6. DMM_BT & Insulation-Tester_BT BM 78xBT, BM 71xBT & BM 878_BT
6.1. More
6.1.1. Disconnect
6.1.2. Status
6.1.2.1. Find (PUSH ON)
6.1.2.2. REMOVE (ADMIN ONLY)
6.1.2.3. Device / Model No.
6.1.2.4. RSSI
6.1.2.5. MAC address
6.1.2.6. Power: Bat.
6.1.2.7. Place/ Zone/ Location/ Point 1
6.1.2.8. Picture_Point 1 (Photo)
6.1.3. Single-Step Record
6.1.3.1. Step No.
6.1.3.2. Date/ Time
6.1.3.3. Reading_1
6.1.3.4. Reading_n
6.1.3.5. Unit
6.2. ReadingS
6.2.1. Real Time Logger
6.2.1.1. More
6.2.1.1.1. Disconnect
6.2.1.1.2. Interval
6.2.1.1.3. Duration
6.2.1.1.4. Add Parameter(PULL DOWN)
6.2.1.1.5. Max, Min, Avg (Hide/ Visible)
6.2.1.1.6. Scale ( Log, Linear )
6.2.1.1.7. Hi/Lo limit Curve ( Hide/ Visible )
6.2.1.1.8. Save
6.2.1.1.9. Import
6.2.1.1.10. Export
6.2.1.2. Zoom in
6.2.1.3. Zoom out
6.2.1.4. Full Screen
6.2.1.5. Lessen
6.2.1.6. Trend Curve