1. .
1.1. .
1.1.1. .
1.1.1.1. .
1.1.1.1.1. .
1.1.1.2. .
2. 5 - Monitoring Redundancy
2.1. .
3. KB Articles
3.1. .
4. Q & A
4.1. Do they have the same IP when configuration?
4.1.1. When configuring - configure the same. Redundancy will handle the configuration and IP address swapping - making 2nd 1+ current.
4.2. Can redundancy be used during a download?
4.2.1. No! Can't do download changes.
4.3. Remote IO go into fault during switchover?
4.3.1. No!
4.4. Can switchover trigger SMTP?
4.4.1. Can monitor trigger to alarm or do anything you want. KB article is in list
5. 1 - Intro
5.1. .
5.1.1. .
5.1.1.1. .
5.1.1.1.1. .
5.1.1.1.2. .
5.1.2. Only have to make changes to primary - secondary changes are synced automatically
5.1.3. Online changes are sent also
6. 2 - Hardware and Resrictions
6.1. .
6.1.1. .
6.1.1.1. .
6.1.1.1.1. .
6.1.1.1.2. In most cases increase watchdog time
6.1.1.2. HMI Tag conversion takes some some time before Tags come back on scan after a switchover.
6.1.1.3. It's not a bumpless switch over as it's not Class 1
6.1.1.4. ****3rd party data server could take a few minutes!
6.1.1.5. Ethernet IO must be multicast for consumed tags
6.1.1.6. Motion control is not supported
6.1.2. .
7. 3 - How to Enable and Configure
7.1. .
7.1.1. .
7.1.2. .
8. 4 - Redundancy switchover
8.1. .
8.1.1. .
8.1.1.1. .
8.1.1.1.1. .
8.1.1.1.2. .
8.1.1.2. Channel 2 is active and blinking
8.1.2. Can take a while (30seconds up to 10 minutes) to qualify
8.1.3. Can monitor progress for qualifications